Aidite Wax Blanks

Aidite Wax Blanks are the optimal CAD/CAM wax blank for milled restorations. Wax Blanks are made of stable and high-quality materials with low contraction. Wax chips won’t be stuck onto the milling bur and the milled part would not be broken at the edge, which provide the best result for the milled wax pattern. 100 % burn-out wax.Due to high material homogeneity, a perfect fit and surface quality can be achieved in the final restoration.

Features:-

• Easier to process
• Low resin content
• Environment friendly
• Compatible with most investment materials
• No deformation

Indications:

• Wax models
• Calibration

• Hardness:95 (Shore “A” Scale)
• Density:0.92g/cm³
• Ignition point:298ºC
• Melting point:114ºC
• Volume shrinkage:6.24% typical
• Ash content:0.0082%
• Flexural modulus:10.09
• Thermal expansivity:1.09×10⁻⁴
• Viscosity 5Mpam^0.5:1790 cs
• Colour: White

• 1 x Wax Blank

• Select the wax blank according to the procedure.
• Carve the wax pattern according to the restoration and follow the investment and casting process.
• Ensure the entire wax has been burnt out for a smooth surface of the restoration.

• How can a smooth surface restoration be ensured?

Due to the highly homogeneous material and fully burn out feature,restorations with extremely smooth surfaces can be made.