Aidite Coloring Liquid – ST

Aidite Coloring Liquid – ST for the inner crown and a full crown with a rich and bright color coincide with the color of the natural tooth. It has 100% biocompatibility, brush dyeing technology can reproduce every detail and uniform color to increase the aesthetic effect and improve technicians’ performance with super infiltration and simple coloring process.

Features:-

• Rich colors, good dyeing effect.
• Excellent penetration: can rapidly complete penetrating the inside of the teeth, easy to color;
• Simple operation, good stability.
• Match well with zirconia blank.

Coloring Liquid – ST Shades :

• A1,A2,A3,A3.5,A4,B1,B2,B3,B4,C1,C2,C3,C4,D2,D3,D4.
• Make the restoration adhesive with undertone compared with 16 Shade Guide

• 1 x 50ml Coloring Liquid bottle

Step 1 : Brush and cutthe end fluid

• Drop the cut end liquid into the bottle upper middle
• Drop indicator.
• Mixing (ratio: 1 Drop Indicator + 25 ml Cut and fluid).
• Dip with 2# brush Right amount of cut and fluid Not too much.
• The first pass of vertical painting Cut 1/3.
• Second pass of horizontal brushing maxillary margin.
• Brush along the ridge.

Step 2 : Step 2: Immersion (60s)

• Pour the Staining solution Can cover the entire repair Complex.
  
• Put in the restoration, Simultaneous timing.
• Use plastic tweezers gently Shake restoration, drain Remove bubbles.

Step 3 : Drying

• Drying tools : oven.
• Drying temperature: 70 C.
• Drying time : Single crown, under 6 units, minimum drying time is 20 mins.
• The minimum drying time for bridges of 6 units and above is completed follow the sintering curve specified by Aicte.

Drying before rapid sintering:

• Drying tools: oven.
• Drying temperature : 150 C
• Drying time : 30 min
• After the operation is completed, follow the sintering curve specified by Aidite