Hudens Bio Burstar HP Carbide Flat End Fissure Burs

Hudens Bio Burstar HP Carbide Flat End Fissure Burs

• Solid tungsten carbide-bur that does not weld surface to shank
• When cutting, it does not run out so it has excellent cutting efficiency and lifespan.

POWERFUL CUTTING PERFORMANCE

• Carefully designed blade structure, rake angle, flute depth, and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of our burs. Hudens Bio burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

MAXIMUM STRENGTH & DURABILITY

• Proper selection of tungsten carbide and high-quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of a Hudens Bio bur.

• Overall length – 44.5mm
• Shank diameter – 2.35mm
• Shape – Flat End Fissure
• For Low-Speed Straight Handpiece
• Autoclavable up to 134°C

Head Diameter :

• Bur FF-B010 – 1.0mm
• Bur FF-B012 – 1.2mm
• Bur FF-B014 – 1.4mm
• Bur FF-B016 – 1.6mm
• Bur FF-B018 – 1.8mm
• Bur FF-B021 – 2.1mm
• Bur FF-B023 – 2.3mm

• Pack of 6

• Insert the instrument as deeply as possible into the Straight handpiece.
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.