Itena DentoCore Body Core Build Up Material

Corono-radicular restorations

Post cementation

 Advantages :-

• Dual (self- and light-curing).
• Polymerization guaranteed, even in the areas which are unreachable with the LED curing unit light.
• Rubbery phase allows for removal of excess material.
• Nanoparticle technology.
• Enhanced mechanical properties of conventional.
• Bis-GMA composite.
• Cuts like natural dentine and matches the natural tooth.
• Low polymerization shrinkage.
• Better marginal adaptation.
• Excellent compressive strength for long lasting restorations.
• Strengthens natural tooth structure and helps to prevent secondary tooth decay.
• The most radiopaque available.
• 3 different tips for Automix syringes: Extra-fine, intra-oral and fine and flexible colibri.

Properties :-

• Compressive strength – 248 MPa
• Linear shrinkage – 1.2%
• Flexural strength – 200 MPa
• Diametral tensile strength – 40 MPa
• Water absorption – 2 μg/mm3
• Depth of cure. Irradiation (LED lamp for 20s) – 5.2 mm
• Depth of cure. Irradiation (Halogen lamp for 40s) – 9 mm
• Exotherm temp (°C) – 32°C
• Working time – 1.5 min
• Photo setting time – 20 s
• Auto setting time – 4.5 min
• Radiopacity – 400% of Al

Hints and Tips :-

• While filling a matrix, keep the tip at the bottom of the matrix in order to ensure a good fill. To avoid bubbles when dispensing the composite, take care to keep the tip constantly in contact with the product.
• The use of a matrix ensures that the restoration fits the dental core correctly whilst preventing material leaking out into the interdental spaces.
• DentoCore Body can be added after polymerization.
• DentoCore Body can be used on a vital tooth or a pulpless tooth.
• Due to its superior wear and tear resistance, DentoCore Body can be left in the buccal cavity, even without a prosthetic tooth protection.